Please use this identifier to cite or link to this item: http://tede2.uepg.br/jspui/handle/prefix/1453
metadata.dc.type: Dissertação
Title: APLICAÇÃO DE ANÁLISE ESTATÍSTICA NAS CURVAS σ-N DA LIGA DE ALUMÍNIO 7050-T7451 DE APLICAÇÃO ESTRUTURAL
metadata.dc.creator: Canto, Osmari Ademir Hoffmann do
metadata.dc.contributor.advisor1: Carvalho, André Luis Moreira de
metadata.dc.contributor.referee1: Torres, Marcelo Augusto Santos
metadata.dc.contributor.referee2: Pariona, Moisés Meza
metadata.dc.description.resumo: Havendo a necessidade de se apresentar resultados cada vez mais confiáveis no que diz respeito à vida em fadiga da liga de alumínio 7050-T7451 de aplicação estrutural o presente trabalho norteia seu foco principal na realização de uma análise estatística dos dados de fadiga coletados a partir de ensaios de fadiga axial realizados em espécimes desta liga. Os dados coletados a partir destes ensaios podem ser tratados por vários tipos de funções de distribuição. Cada função apresenta particularidades que possuem relação direta com a natureza dos dados coletados. Dessa forma funções diferentes podem apresentar resultados diferentes quando aplicadas ao mesmo conjunto de dados. Sendo assim, nem sempre fica claro qual função de distribuição apresentou o resultado mais confiável em relação aos dados analisados. Para o tratamento estatístico, utilizou-se a ferramenta MINITAB Release 13.0 onde foram analisadas quatro funções de distribuição, Weibull, Lognormal Base e, Loglogística e Normal. A escolha da função que melhor representou os dados foi baseada em dois métodos, o primeiro foi o método gráfico, onde foi obtida uma analise qualitativa da distribuição dos dados de fadiga, o segundo foi o método analítico que permite fazer uma análise quantitativa dos resultados. Para a definição da função que apresentou o melhor resultado, foram realizadas comparações das estatísticas de maior relevância, principalmente o valor de Anderson Darling, que foi o teste de aderência utilizado no trabalho. Além deste método foram também realizadas comparações entre os erros referentes à probabilidade de falha a 50% e também dos valores dos intervalos de confiança. As curvas – N foram plotadas a partir dos melhores valores apresentados para cada nível de tensão. Os resultados obtidos após o tratamento estatístico de todos os valores de vida em fadiga mostraram que para os níveis de tensão mais elevados (fadiga de baixo ciclo), qualquer uma das quatro funções estudadas consegue apresentar boa aderência aos dados de fadiga com erros considerados pequenos. Para os valores referentes a níveis de tensão médios, onde começaram a surgir dispersões mais consideráveis, as quatro funções ainda mostraram boa aderência, mas apresentaram erros mais significativos. Ao tratar os conjuntos de dados de fadiga de alto ciclo, as funções não obtiveram um bom desempenho na aderência aos dados, pois, apresentaram valores muito elevados para a estatística de Anderson Darling. Nesses casos a função Loglogística se mostrou mais eficiente conseguindo apresentar melhores resultados até mesmo em conjuntos onde houveram valores censurados (amostras que não falharam). Com isso, pode-se afirmar que as curvas de fadiga obtidas a partir deste método fornecem resultados mais confiáveis, garantindo maior segurança na previsão de vida em fadiga de componentes construídos com a liga de alumínio 7050-T7451.
Abstract: Given the importance of presenting ever more reliable results with respect to the fatigue life of aluminum alloy 7050-T7451 application of this structural work guided their main focus on carrying out a statistical analysis of fatigue data collected from Axial fatigue tests conducted on specimens of this alloy. The data collected from these tests may be treated by various types of distribution functions, each function has some special features that have direct relation to the nature of the data collected thus different functions may have different results when applied to the same data set. Therefore it is not always clear which distribution function presented the results more reliable in relation to the data analyzed. For the statistical treatment of the data we used the statistical tool Minitab Release 13.0 which were analyzed four functions of distribution, Weibull, Lognormal Base and Loglogística and Normal. The choice of the function that best represented the data was based on two methods, graph method, where we obtained a qualitative analysis of the distribution of fatigue data and analytical method which produced a quantitative analysis of the results. For the definition of the function that showed the best results, comparisons were made of the most relevant statistics, especially the value of Anderson Darling test that was used in the work of adhesion. In addition to this statistical comparisons were also made errors regarding the probability of failure of 50% and also the values of the confidence intervals. The curves σ - N were plotted from the best figures for each voltage level. The results obtained after the statistical treatment of all values of fatigue life showed that for higher voltage levels (low cycle fatigue) any of the four functions studied can provide good adhesion to the fatigue data with errors quite small, as expected. For the values for medium voltage levels, which began to appear more substantial dispersions four functions still showed good adhesion, but showed most significant errors. When dealing with data sets of high cycle fatigue where stress levels were lower, the functions not performed well in fitting to the data, therefore, showed very high values of Anderson Darling statistic in which case the function is Loglogística was very efficient achieving produce good results even in groups where there were censored values (samples that did not fail). Thus it can be stated that the fatigue curves obtained from this method provide more reliable results, ensuring more security in predicting fatigue life of components built with aluminum alloy 7050-T7451.
Keywords: fadiga
confiabilidade
funções de distribuição
curvas – N
fatigue
reliability
distribution functions
curves - N.
metadata.dc.subject.cnpq: CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
metadata.dc.language: por
metadata.dc.publisher.country: BR
Publisher: UNIVERSIDADE ESTADUAL DE PONTA GROSSA
metadata.dc.publisher.initials: UEPG
metadata.dc.publisher.department: Desenvolvimento e Caracterização de Materiais
metadata.dc.publisher.program: Programa de Pós-Graduação em Engenharia e Ciências de Materiais
Citation: CANTO, Osmari Ademir Hoffmann do. APLICAÇÃO DE ANÁLISE ESTATÍSTICA NAS CURVAS σ-N DA LIGA DE ALUMÍNIO 7050-T7451 DE APLICAÇÃO ESTRUTURAL. 2013. 135 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2013.
metadata.dc.rights: Acesso Aberto
URI: http://tede2.uepg.br/jspui/handle/prefix/1453
Issue Date: 28-Aug-2013
Appears in Collections:Programa de Pós - Graduação em Engenharia e Ciências de Materiais

Files in This Item:
File SizeFormat 
Osmari Ademir.pdf5.58 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.