Please use this identifier to cite or link to this item: http://tede2.uepg.br/jspui/handle/prefix/1774
metadata.dc.type: Dissertação
Title: Análise in vitro da resistência fluxural de uma resina composta direta e uma resina laboratorial de segunda geração associadas ou não a fibras de reforço
metadata.dc.creator: Portero, Priscila Paiva
metadata.dc.contributor.advisor1: Gomes, Osnara Maria Mongruel
metadata.dc.contributor.referee1: Gomes, João Carlos
metadata.dc.description.resumo: O objetivo deste estudo foi avaliar in vitro a resistência flexural da resina composta direta (FiltekTM Z-250 – 3M/ESPE) e da resina laboratorial de segunda geração (CeseaDST II – Kuraray) associadas ou não a fibras de vidro (Fibrexcoronal – Angelus), variando a fonte de luz fotoativadora (L.E.Demetron 1 – Kerr e Strobolux – EDG). Foram confeccionados 56 corpos-de-prova (CP) em uma matriz metálica bipartida com as dimensões de 13,0 mm de diâmetro X 2,4 mm de espessura divididos em 8 grupos (n=7) de estudo: GI - Resina FiltekTM Z-250/ Sem fibras/ LED; GII – Resina FiltekTM Z-250/ Sem fibras/ Strobolux; GIII - Resina FiltekTM Z-250/ Fibrex-coronal/ LED; GIV - Resina FiltekTM Z-250/ Fibrex-coronal/ Strobolux; GV – Resina CeseaDST II/ Sem fibras/ LED; GVI - Resina CeseaDST II/ Sem fibras/ Strobolux; GVII - Resina CeseaDST II/ Fibrex-coronal/ LED; GVIII - Resina CeseaDST II/ Fibrex-coronal/ Strobolux. Os CP foram submetidos ao teste de resistência flexural biaxial no equipamento Kratos com velocidade de 1 ± 0,5 mm/min e célula de carga de 500 Kgf. Os valores de resistência flexural foram submetidos ao teste de Tukey (P=0,01). A média dos resultados em MPa foram: GI – 187,91 ± 32,78; GII – 196,76 ± 31,15; GIII – 208,27 ± 18,79; GIV – 218,02 ± 15,76; GV – 101,72 ± 11,25; GVI – 103,05 ± 9,56; GVII – 164,76 ± 12,54 e GVIII – 176,75 ± 47,03. Concluiu-se que: os compósitos avaliados apresentaram diferentes comportamentos in vitro; o compósito direto FiltekTM Z-250 apresentou maiores valores de resistência flexural em todos os grupos estudados; o tipo de fonte de luz não interferiu na resistência flexural dos compósitos avaliados; o reforço com fibras aumentou a resistência flexural de ambos os compósitos avaliados, sendo que apenas para o compósito indireto CeseaDST II esse aumento foi significante.
Abstract: The present study aims to evaluate in vitro the flexural strength of the direct composite resin (FiltekTM Z-250 – 3M/ESPE) and of the second generation laboratory resin (CeseaDST II – Kuraray) either associated or not to glass fibers (Fibrex-coronal – Angelus), varying the source of photoactivating (L.E.Demetron 1 – Kerr e Strobolux – EDG). Fifty-six samples were made inside a biparted metalic matrix, 13.0 mm in diameter X 2.4 mm thick, divided into 8 study groups (n=7): GI – Resin FiltekTM Z-250/ Fibreless/ LED; GII – Resin FiltekTM Z-250/ Fibreless/ Strobolux; GIII - Resin FiltekTM Z-250/ Fibrex-coronal/ LED; GIV - Resin FiltekTM Z-250/ Fibrex-coronal/ Strobolux; GV – Resin CeseaDST II/ Fibreless / LED; GVI - Resin CeseaDST II/ Fibreless / Strobolux; GVII - Resin CeseaDST II/ Fibrexcoronal/ LED; GVIII - Resin CeseaDST II/ Fibrex-coronal/ Strobolux. The samples were under the test of biaxial flexural strength in the Kratos equipment, with speed of 1 ± 0.5 mm/min and load cell of 500 Kgf. The flexural strength values were submitted to the Tukey test (P=0,01). The rate of the results in MPa were: GI – 187.91 ± 32.78; GII – 196.76 ± 31.15; GIII – 208.27 ± 18.79; GIV – 218.02 ± 15.76; GV – 101.72 ± 11.25; GVI – 103.05 ± 9.56; GVII – 164.76 ± 12.54 e GVIII – 176.75 ± 47.03. The conclusion is that the analyzed composites showed different behaviors in vitro; the direct composite FiltekTM Z-250 showed higher values of flexural strength in all the studied groups; the type of light source did not interfere in the flexural strength of the evaluated composites; reinforcement with fibers increased the flexural strength both evaluated composites, however only for the indirect composite CeseaDST II that increase was significant.
Keywords: compósitos
Materais dentários
Resistência
composites resin
dental materials, strength
metadata.dc.subject.cnpq: CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA
metadata.dc.language: por
metadata.dc.publisher.country: BR
Publisher: UNIVERSIDADE ESTADUAL DE PONTA GROSSA
metadata.dc.publisher.initials: UEPG
metadata.dc.publisher.department: Clinica Integrada, Dentística Restauradora e Periodontia
metadata.dc.publisher.program: Programa de Pós-Graduação em Odontologia
Citation: PORTERO, Priscila Paiva. Análise in vitro da resistência fluxural de uma resina composta direta e uma resina laboratorial de segunda geração associadas ou não a fibras de reforço. 2006. 125 f. Dissertação (Mestrado em Clinica Integrada, Dentística Restauradora e Periodontia) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2006.
metadata.dc.rights: Acesso Aberto
URI: http://tede2.uepg.br/jspui/handle/prefix/1774
Issue Date: 22-Feb-2006
Appears in Collections:Programa de Pós - Graduação em Odontologia

Files in This Item:
File SizeFormat 
Priscila Paiva.pdf752.96 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.