Please use this identifier to cite or link to this item: http://tede2.uepg.br/jspui/handle/prefix/2098
metadata.dc.type: Dissertação
Title: ESTUDO DOS SISTEMAS CeO2(1-x) :Pr6O11(x); CeO2(1-x):Fe2O3(x) E CeO2(0,95-x): Pr6O11(0,05):Fe2O3(x) PARA APLICAÇÃO COMO PIGMENTOS INORGÂNICOS DE BAIXA TOXICIDADE
metadata.dc.creator: Olegario, Renata Cristina
metadata.dc.contributor.advisor1: Antunes, Augusto Celso
metadata.dc.contributor.referee1: Andrade, André Vitor Chaves de
metadata.dc.contributor.referee2: Weber, Juliana Regina Kloss
metadata.dc.description.resumo: A presente pesquisa estudou os sistemas pigmentantes à base de óxido de cério (CeO2) dopados com óxido de praseodímio (Pr6O11) e hematita (Fe2O3 - óxido de ferro), sintetizados pelo método de reação de estado sólido (mistura de óxidos - MO) e pelo método Pechini. Paralelamente foram sintetizados pelo método MO, pigmentos do sistema ternário CeO2-Pr6O11-Fe2O3 com adição de mineralizadores. As amostras sintetizadas por MO foram homogeneizadas a úmido, em álcool isopropílico, em um moinho de bolas horizontal por 18 horas e secas em estufa a 110 C, e tratadas termicamente a 1300 C por 3 horas. Nas amostras sintetizadas pelo método Pechini partiu-se da síntese da resina polimérica, formada pela reação de ácido cítrico, etileno glicol, água e os sais contendo os íons metálicos dos óxidos pretendidos, mantida em manta térmica a 150 C, sob agitação constante, por 2 horas, sendo tratadas termicamente duas vezes a 300 C por 2 horas, e, na sequência, a 900 C por 3 horas. Após tratamento térmico os sistemas pigmentantes foram caracterizados por difração de raios X, espectroscopia de reflectância na região do UV-Vis, microscopia eletrônica de varredura, espectroscopia Raman e análise térmica, sendo determinadas as fases presentes, os parâmetros colorimétricos, valores de band gap, aglomerações micro estruturais e a estabilidade térmica e química frente à esmaltação vítrea. Pigmentos de fase única foram obtidos no sistema binário CeO2-Pr6O11, com adição de até 10% de Pr6O11 sintetizado por MO e com até 3% de Pr6O11 sintetizado por Pechini; já no sistema binário CeO2-Fe2O3, fase única somente em sínteses por MO, com concentrações até 2% de Fe2O3. Tonalidades mais intensas foram obtidas nos pigmentos com adição de até 5% mol de óxido de praseodímio no sistema CeO2-Pr6O11, e com adição de até 3% mol de óxido de ferro no sistema CeO2-Fe2O3. O sistema ternário CeO2-Pr6O11-Fe2O3 apresentou fase secundária PrFeO3, persistindo esta fase mesmo com adição de mineralizadores. Os pigmentos aplicados em frita de baixa temperatura (FBT) e vidro de pára-brisa (VPB) se mostraram resistentes química e termicamente a 800 ºC, sem presença de defeitos superficiais nas placas cerâmicas, apresentando melhor dispersão e homogeneidade da cor.
Abstract: This study focused on the Cerium oxide (CeO2) based pigmenting systems, doped with Praseodymium oxide (Pr6O11) and hematite (Fe2O3 – iron oxide) synthesized through the solid state reaction (OM – oxide mixture) and the Pechini method. Simultaneously, CeO2-Pr6O11-Fe2O3 ternary system pigments were synthesized through OM, with the addition of mineralizers. The samples synthesized through OM were wet homogeneized, in isopropyl alcohol, in a horizontal ball mill for 18 hours and dried in oven at 110 C, then thermally treated at 1300 ºC for 3 hours. In samples synthesized through the Pechini method, the process started from the synthesis of the polymeric resin, formed by the citric acid reaction, glycol ethyl, water and the desired oxide salts, kept in thermal blanket at 150 C, under constant agitation for 2 hours, following two thermal treatments at 300 C for 2 hours, and then one at 900 C for 3 hours. After the thermal treatment the pigmenting systems were characterized through XRD, UV-Vis reflectance spectroscopy, scanning electronic microscopy, Raman spectroscopy and thermal analysis, determining the phases present, the colorimetric parameters, band gap values, micro-structural agglomerations and thermal and chemical stability to glass enamel. Single phase pigments were obtained in the binary system CeO2-Pr6O11, with addition of up to 10% Pr6O11 synthesized through OM and up to 3% Pr6O11 synthesized through the Pechini method, whereas the binary system CeO2-Fe2O3, presented single phase only in OM synthesis, with concentrations up to 2% of Fe2O3. More intense shades were obtained in pigments with addition of up to 5% mol praseodymium oxide in the CeO2-Pr6O11 system, and with up to 3% mol iron oxide in the CeO2-Fe2O3 system. The ternary system CeO2-Pr6O11-Fe2O3 presented secondary phase PrFeo3, remaining this phase even with the addition of mineralizers. The pigments applied to low temperature frits (LTF) and windscreen glass (WSG) showed chemically and thermally resistant at 800 C, free of surface defects on the ceramic plates, presenting better dispersion and color homogeneity.
Keywords: pigmento inorgânico
óxido de cério
difração de raios X
coordenadas colorimétricas
inorganic pigment
cerium oxide
X-ray diffraction
colorimetric coordinates
metadata.dc.subject.cnpq: CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA
metadata.dc.language: por
metadata.dc.publisher.country: BR
Publisher: UNIVERSIDADE ESTADUAL DE PONTA GROSSA
metadata.dc.publisher.initials: UEPG
metadata.dc.publisher.department: Química
metadata.dc.publisher.program: Programa de Pós-Graduação em Química Aplicada
Citation: OLEGARIO, Renata Cristina. ESTUDO DOS SISTEMAS CeO2(1-x) :Pr6O11(x); CeO2(1-x):Fe2O3(x) E CeO2(0,95-x): Pr6O11(0,05):Fe2O3(x) PARA APLICAÇÃO COMO PIGMENTOS INORGÂNICOS DE BAIXA TOXICIDADE. 2012. 166 f. Dissertação (Mestrado em Química) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012.
metadata.dc.rights: Acesso Aberto
URI: http://tede2.uepg.br/jspui/handle/prefix/2098
Issue Date: 2-Mar-2012
Appears in Collections:Programa de Pós - Graduação em Química Aplicada

Files in This Item:
File SizeFormat 
Renata Olegario.pdf5.16 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.